DMI3000 M Microscopio manual invertido para aplicaciones industriales
Publications 2019
The Influence of Pre-compression Deformation on Tension Property of DP590
Ma M, Kim D, Wang G, Liu G
Advanced High Strength Steel and Press Hardening
2019 pp: 152-158
The Effect of Pre-compression Deformation on Tension-compression Fatigue Properties of Hot Rolled DP590
Ma M, Kim D, Wang G, Liu G
Advanced High Strength Steel and Press Hardening
2019 pp: 133-138
Effect of operating voltage on microstructure and microhardness of NiCoCrAlYTa-Y2O3 composite coatings on single crystal superalloy produced by electrospark deposition
Wang D, Wang W, Wang M, Li Y, Chen X, et. al.
Surface and Coatings Technology
2019 vol: 358 pp: 628-636
Crystal orientation and morphology of α lamellae in wrought titanium alloys: On the role of microstructure evolution in β processing
ZHENG H, FAN X, ZENG X, ZUO R
Chinese Journal of Aeronautics
2019 vol: 32 (5) pp: 1305-1313
Publications 2018
Understanding flow dynamics, viability and metastatic potency of cervical cancer (HeLa) cells through constricted microchannel
Nath B, Raza A, Sethi V, Dalal A, Ghosh S, et. al.
Scientific Reports
2018 vol: 8 (1) pp: 17357
Simulation and experimental research of the cross-shape-effects on the performance of ion measurement by microchip electrophoresis
Yang M, Huang Z, Cheng W, Liu H, You H
Measurement Science and Technology
2018 vol: 29 (12) pp: 125103
Fabrication of Novel Open-Cell Foams of Poly(ε-caprolactone)/Poly(lactic acid) Blends for Tissue-Engineering Scaffolds
Lv Z, Zhao N, Wu Z, Zhu C, Li Q
Industrial & Engineering Chemistry Research
2018 vol: 57 (39) pp: 12951-12958
The behavior and mechanism of void self-shrinkage in diffusion bonded 1Cr11Ni2W2MoV steel joint: Effect of temperature and void morphology
Zhang C, Li M, Li H
Journal of Manufacturing Processes
2018 vol: 35 pp: 71-78
Microstructure evolution of Ti-6Al-2Zr-1Mo-1V alloy and its mechanism in multi-pass flow forming
Wang X, Zhan M, Fu M, Gao P, Guo J, et. al.
Journal of Materials Processing Technology
2018 vol: 261 pp: 86-97
A plug-in electrophoresis microchip with PCB electrodes for contactless conductivity detection
Yang M, Huang Z, You H
Royal Society Open Science
2018 vol: 5 (5) pp: 171687
Effect of PWHT on Microstructure, Mechanical and Corrosion Behaviour of Gas Tungsten Arc Welds of IN718 Superalloys
Dilkush Mohammed R, Madhusudhan Reddy G, Srinivasa Rao K
IOP Conference Series: Materials Science and Engineering
2018 vol: 330 (1) pp: 012030
Comparative Studies on Microstructure, Mechanical and Pitting Corrosion of Post Weld Heat Treated IN718 Superalloy GTA and EB Welds
Dilkush Mohammed R, Madhusudhan Reddy G, Srinivasa Rao K
IOP Conference Series: Materials Science and Engineering
2018 vol: 330 (1) pp: 012051
Acceleration of globularization during interrupted compression of a two-phase titanium alloy
Fan X, Zheng H, Zhang Y, Zhang Z, Gao P, et. al.
Materials Science and Engineering: A
2018 vol: 720 pp: 214-224
Aluminum/polypropylene composites produced through injection molding
Li X, Gong N, Yang C, Zeng S, Fu S, et. al.
Journal of Materials Processing Technology
2018 vol: 255 pp: 635-643
Publications 2017
Deformation Mechanism and Hot Workability of Extruded Magnesium Alloy AZ31
Jin Z, Li N, Yan K, Wang J, Bai J, et. al.
Acta Metallurgica Sinica (English Letters)
2017 pp: 1-11
Surface topography induced high injection joining strength of polymer-metal composite and fracture mechanism
Li X, Liu F, Gong N, Yang C, Wang B
Composite Structures
2018 vol: 184 pp: 545-553
Wire bond degradation under thermo- and pure mechanical loading
Pedersen K, Nielsen D, Czerny B, et. al.
Microelectronics Reliability
2017 vol: 76-77 pp: 373-377
On the shear strength of similar diffusion bonded 1Cr11Ni2W2MoV stainless steel hollow structural components: Effect of void morphology
Zhang C, Li M, Li H
Journal of Manufacturing Processes
2017 vol: 29 pp: 10-17
Influence of Cr addition on the interface purification of vacuum brazed NiCr-Cr3C2 coatings on single crystal superalloy
Wang D, Wang W, Chen X, et. al.
Surface and Coatings Technology
2017 vol: 325 pp: 200-209
Burning products of TA15 titanium alloy by friction oxygen concentration method
Sui N, Mi G, Yan M, Cao J, Huang X
Rare Metals
2017 pp: 1-9
Poly(2-oxazoline) block copolymer nanoparticles for curcumin loading and delivery to cancer cells
Raveendran R, Mullen K, Wellard R, Sharma C, Hoogenboom R, et. al.
European Polymer Journal
2017
Publications 2016
Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
Song L, Li J, Zhao Y, Chen X, Chen L
Journal of Polymer Engineering
2016 vol: 0 (0)
Effect of vibration frequency on microstructure and performance of high chromium cast iron prepared by lost foam casting
Zou W Zhang Z Yang H Li W
China Foundry
2016 vol: 13 (4) pp: 248-255
The flow behavior and microstructure evolution during (α+β) deformation of β wrought TA15 titanium alloy
Zhao A Yang H Fan X Gao P Zuo R et. al.
Materials & Design
2016 vol: 109 pp: 112-122
The role of dynamic and post dynamic recrystallization on microstructure refinement in primary working of a coarse grained two-phase titanium alloy
Fan X Yang H Gao P Zuo R Lei P et. al.
Journal of Materials Processing Technology
2016 vol: 234 pp: 290-299
Preparation, thermal analysis and mechanical properties of in-situ Al2O3/SiO2(p)/Al composites fabricated by using zircon tailing sand
Wang K Li W Du J Tang P Chen J et. al.
Materials & Design
2016 vol: 99 pp: 303-313
Fourier transform infrared and Raman spectroscopy studies on magnetite/Ag/antibiotic nanocomposites
Ivashchenko, Olena; Jurga-Stopa, Justyna; Coy, Emerson; Peplinska, Barbara; Pietralik, Zuzanna et al. (2016)
Applied Surface Science vol. 364 p. 400-409
Quantitative analysis of microstructure evolution induced by temperature rise during (α + β) deformation of TA15 titanium alloy
Guo, Liang-Gang; Zhu, Shuai; Yang, He; Fan, Xiao-Guang; Chen, Fu-Long (2015)
Rare Metals vol. 35 (3) p. 223-229
Effect of particle aspect ratio in magnetorheology
Morillas, Jose R; Carreón-González, Elizabeth; Vicente, Juan de (2015)
Smart Materials and Structures vol. 24 (12) p. 125005
Significant performance enhancement of a UASB reactor by using acyl homoserine lactones to facilitate the long filaments of Methanosaeta harundinacea 6Ac
Li, Lingyan; Zheng, Mingyue; Ma, Hailing; Gong, Shufen; Ai, Guomin et al. (2015)
Applied microbiology and biotechnology vol. 99 (15) p. 6471-80
Development of non-linear continuous cooling precipitation diagram for Al–Zn–Mg–Cu alloy
Li, H. Y.; Liu, J. J.; Yu, W. C.; Li, D. W. (2014)
Materials Science and Technology
Safety issues related to the maintenance operations in a vegetable oil refinery: A case study
Gabriele Landucci, Gianfranco Lovicu, Federica Barontini, Luca Guidi, Cristiano Nicolella (2014)
Journal of Loss Prevention in the Process Industries 30 p. 95-104
Effect of mold temperature on motion behavior of short glass fibers in injection molding process
Xi-Ping Li, Guo-Qun Zhao, Can Yang (2014)
The International Journal of Advanced Manufacturing Technology
Biodegradable chitosan/alginate BSA-gel-capsules for pH-controlled loading and release of doxorubicin and treatment of pulmonary melanoma
Haijun Shen, Hui Shi, Meng Xie, Kun Ma, Bo Li, Song Shen, Xinshi Wang, Yi Jin (2013)
Journal of Materials Chemistry B
ß Grain Growth Kinetics of a New Metastable ß Titanium Alloy
Yue Fei, Xin Nan Wang, Zhi Shou Zhu, Jun Li, Guo Qiang Shang, Li Wei Zhu (2013)
Materials Science Forum 747-748 p. 844-849
Microstructure Reconstruct of Continuous Fiber Bundles by Image Analysis
Jin Chao Li, Li Chen, L. Li (2011)
Advanced Materials Research 332-334 p. 1015-1018
Effect of Microstructure on Sliding Wear Behaviour of Modified 9Cr-1Mo steel
Ipsa Tripathy (2011)
