EM TIC 3X Ion Beam Milling System

Distinct capacity fade modes of Nickel-rich/Graphite-SiOx power lithium-ion battery
Li, Hang, et al., Journal of Energy Storage 47 (2022): 103830. doi.org/10.1016/j.est.2021.103830

In-situ Probing the Near-Surface Structural Thermal Stability of High-Nickel Layered Cathode Materials
Li, Jiyang, et al., Energy Storage Materials (2022). doi.org/10.1016/j.ensm.2022.01.007

Value-creating upcycling of retired electric vehicle battery cathodes 
Qian, Guannan, et al., Cell Reports Physical Science (2022): 100741. doi.org/10.1016/j.xcrp.2022.100741

The functional separator for lithium-ion batteries based on phosphonate modified nano-scale silica ceramic particles 
Huang, Boyang, et al., Journal of Power Sources 498 (2021): 229908. doi.org/10.1016/j.jpowsour.2021.229908

Microstructure and mechanical properties of joints between GaAs solar cell electrode and Ag interconnector under temperature thermal cycle
Ding, Yuhan, et al., 2021 22nd International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2021. doi.org/10.1109/ICEPT52650.2021.9568149

Enhanced electrochemical performance of MnFe@ NiFe Prussian blue analogue benefited from the inhibition of Mn ions dissolution for sodium-ion batteries
Feng, Fan, et al., Chemical Engineering Journal 411 (2021): 128518. doi.org/10.1016/j.cej.2021.128518

Ultrathin Li–Si–O Coating Layer to Stabilize the Surface Structure and Prolong the Cycling Life of Single-Crystal LiNi0. 6Co0. 2Mn0. 2O2 Cathode Materials at 4.5 V 
Li, Guangxin, et al., ACS Applied Materials & Interfaces 13.9 (2021): 10952-10963. doi.org/10.1021/acsami.0c22356

Comparative Studies of Polycrystal and Single-Crystal LiNi0. 6Co0. 2Mn0. 2O2 in Terms of Physical and Electrochemical Performance
Li, Guangxin, et al., ACS Sustainable Chemistry & Engineering 9.35 (2021): 11748-11757. doi.org/10.1021/acssuschemeng.1c03002

Close-spaced thermally evaporated 3D Sb 2 Se 3 film for high-rate and high-capacity lithium-ion storage
Li, Wangyang, et al., Nanoscale 13.21 (2021): 9834-9842. doi.org/10.1039/D1NR01585K

Poly (ionic liquid) Based Composite Electrolytes for Lithium-Ion Batteries
Löwe, Robert, et al., Polymers 13.24 (2021): 4469. doi.org/10.3390/polym13244469

Investigation of the Mechanical Behavior of Electrodes after Calendering and Its Influence on Singulation and Cell Performance
Mayer, Dominik, et al., Processes 9.11 (2021): 2009. doi.org/10.3390/pr9112009

A Rational Design for a High‐Safety Lithium‐Ion Battery Assembled with a Heatproof–Fireproof Bifunctional Separator
Peng, Longqing, et al., Advanced Functional Materials 31.10 (2021): 2008537. doi.org/10.1002/adfm.202008537

Alleviating the Storage Instability of LiNi0. 8Co0. 1Mn0. 1O2 Cathode Materials by Surface Modification with Poly (acrylic acid)
Peng, Shiyun, et al., ACS Sustainable Chemistry & Engineering 9.22 (2021): 7466-7478. doi.org/10.1021/acssuschemeng.1c00802

Understanding the calendering processability of Li (Ni0. 33Mn0. 33Co0. 33) O2-based cathodes
Primo, Emiliano N., et al., Journal of Power Sources 488 (2021): 229361. doi.org/10.1016/j.jpowsour.2020.229361

MXene Enables Stable Solid‐Electrolyte Interphase for Si@ MXene Composite with Enhanced Cycling Stability
Zhou, Hao, et al., ChemElectroChem 8.16 (2021): 3089-3094. doi.org/10.1002/celc.202100878

Investigation of capacity fade for 18650-type lithium-ion batteries cycled in different state of charge (SoC) ranges
Zhu, Jiangong, et al., Journal of Power Sources 489 (2021): 229422. doi.org/10.1016/j.jpowsour.2020.229422

More Uniform Pd Distribution in Free-Air Balls of Pd-Coated Cu Bonding Wire using MovableFlame-off Electrode, N. Ly, D. Xu, W.H. Song, M. Mayer, Microjoining Laboratory, Centre for Advanced Materials Joining, Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, Ontario, Canada N2L 3G1, Microelectronics Reliability 55 (2015) 201–206,http://www.sciencedirect.com/science/article/pii/S0026271414004466 Thick Electrodes for High Energy Lithium Ion Batteries, Madhav Singh,^a,z,  Jörg Kaiser,^b and Horst Hahna,c , a Institute of Nanotechnology, Karlsruhe Institute of Technology (KIT), 76344 Eggenstein-Leopoldshafen, Germany , bProject Competence-E, Karlsruhe Institute of Technology (KIT), 76344 Eggenstein-Leopoldshafen, Germany , cHelmholtz Institute Ulm for Electrochemical Energy Storage (HIU), 89081 Ulm, Germany, ECS, Journal of The Electrochemical Society, 162 (7) A1196-A1201 (2015) http://jes.ecsdl.org/content/162/7/A1196.short Atmospheric Corrosion of Mg Alloy AZ91D Fabricated by a Semi-Solid Casting Technique: The Influence of Microstructure, M. Esmaily,^a,*^,z,  N. Mortazavi,b,* J. E. Svensson,^a,** , M. Halvarsson,^b,  D. B. Blücher,^c, A. E.W. Jarfors,^d, M. Wess´en,^d and L. G. Johansson^a , ^aDepartment of Chemical and Biological Engineering, Chalmers University of Technology, SE-412 96 Göteborg, Sweden, ^bDepartment of Applied Physics, Chalmers University of Technology, SE-412 96 Göteborg, Sweden, ^cSINTEF Materials and Chemistry, N-7465 Trondheim, Norway, ^dDepartment of Materials and Manufacturing - Casting, Jönköping University, SE-551 11 Jönköping, Sweden, ECS, Journal of The Electrochemical Society, 162 (7) C311-C321 (2015),http://jes.ecsdl.org/content/162/7/C311.short Raman, AFM, and TEM profiling of QD multilayer structures, E Sheremet¹, AMilekhin^2,3, RDRodriguez¹, DDmitriev², AToropov², AGutakovskii², DDentel⁴,WGrünewald⁵, MHietschold⁴and DRT Zahn¹, ¹ Semiconductor Physics, Technische Universität Chemnitz, D-09107 Chemnitz, Germany, ² Institute of Semiconductor Physics, Novosibirsk, Russia ,³ Novosibirsk State University, Pirogov str. 2, 630090, Novosibirsk, Russia ,⁴ Solid Surfaces Analysis, Technische Universität Chemnitz, D-09107 Chemnitz, Germany ,⁵ Leica Mikrosysteme GmbH, 1170 Vienna, Austria, IOP Publishing, Mater. Res. Express 2 (2015) 035003, http://iopscience.iop.org/2053-1591/2/3/035003 Primary and Secondary Dealloying of Au(Pt)-Ag: Structural and Compositional Evolutions, and Volume Shrinkage, Xing-Long Ye, Ning Lu, Xiao-Ju Li, Kui Du, Jun Tan, and Hai-Jun Jinz Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 110016 Shenyang, People’s Republic of China; The Electrochemical Society. [DOI: 10.1149/2.0131412jes]; http://jes.ecsdl.org/content/161/12/C517.short Influence of temperature on the atmospheric corrosion of the Mg–Al alloy AM50, M. Esmaily a,*, M. Shahabi-Navid a, J.-E. Svensson a, M. Halvarsson b, L. Nyborg c, Y. Cao c, L.-G. Johansson a; a Department of Chemical and Biological Engineering, Chalmers University of Technology, SE-412 96 Göteborg, Sweden; b Department of Applied Physics, Chalmers University of Technology, SE-412 96 Göteborg, Sweden; c Department of Materials & Manufacturing Technology, Chalmers University of Technology, 2A, SE-412 96 Göteborg, Sweden; Elsevier Ltd, Corrosion Science 90 (2015) 420–433; http://www.sciencedirect.com/science/article/pii/S0010938X14004971 Triple ion beam cutting of diamond/Al composites for interface characterization,  Gang Ji ^a,b, Zhanqiu Tan ^c, Rajashekhara Shabadi ^a, Zhiqiang Li ^c, Wolfgang Grünewald ^d, Ahmed Addad ^a, Dominique Schryvers^b, Di Zhang ^c , ^a Unité Matériaux et Transformations, UMR CNRS 8207, Bâtiment C6, Université Lille 1, 59655 Villeneuve d'Ascq, France, ^b Electron Microscopy for Materials Science (EMAT), University of Antwerp, Groenenborgerlaan 171, 2020 Antwerp, Belgium, ^c State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, China,  ^d Leica Mikrosysteme GmbH, Physikneubau, Reichenhainer Straße 70, DE-09126 Chemnitz, Germany, Science Direct, Elsevier, Materials Characterization, Volume 89, March 2014, Pages 132-137 http://www.sciencedirect.com/science/article/pii/S1044580314000217 Quasi-epitaxial Growth of [Ru(bpy)3 ]2+ by Confinement in Clay Nanoplatelets Yields Polarized Emission  Daniel A. Kunz¹, Markus J. Leitl², Lukas Schade³, Jasmin Schmid¹, Beate Bojer¹, Ulrich T. Schwarz³, Geoffrey A. Ozin⁴,*, Hartmut Yersin²,* and Josef Breu¹, ¹Department of Inorganic Chemistry I, University of Bayreuth, Bayreuth, Germany, ²Department of Physical Chemistry, University of Regensburg, Regensburg, Germany, ³Department of Microsystems Engineering IMTEK, University of Freiburg, Freiburg, Germany, ⁴Materials Chemistry and Nanochemistry Research Group, Center for Inorganic and Polymeric Nanomaterials, Chemistry Department, University of Toronto, Toronto, Ontario, Canada, Wiley, October 2014, DOI: 10.1002/smll.201400826, http://onlinelibrary.wiley.com/doi/10.1002/smll.201400826/abstract